TRENDnet TPE-TG82ES, Руководство пользователя, Страница: 14 / 59

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE‐TG82ES
11
Change Web idle login timeout settings
System > Timeout
This section explains how to modify the switch management page idle timeout settings.
1. Log into your switch management page (see “ Access your switch management page ”
on page 6).
2. Click on System , and click on Timeout .
3. Review the settings. Click Apply to save changes.

Web Idle Timeout ‐ Enter the idle period in minutes, when the switch will
automatically log out a user from the switch management page.
4. In the left hand panel, click on Save
5. Click Save Settings to Flash , then click OK.
Note: This step saves all configuration changes to the NV‐RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Enable or Disable SNMP
System > SNMP > Global Settings
You can manage a switch by viewing and configuring the management information base
(MIB) objects on the device with the Simple Network Management Program (SNMP).
This chapter describes how to configure SNMP. A Group Name, IP address of the switch
and at least one community string is the minimum required to manage the switch using
SNMP.
Note: If you disable the SNMP on the switch, the switch will not be manageable via
SNMP using MIBs.
1. Log into your switch management page (see “ Access your switch management page ”
on page 6).
2. Click on System , click on SNMP , and click on Global Settings .
3. Review the settings. Click Apply to save changes.

SNMP Global State: Click the drop‐down list to one of the following options.
o
Enabled ‐ When you enable this parameter, the SNMP agent is active.
You can manage the switch with SNMP network management
software and the switch’s private MIB.
o
Disabled ‐ When you enable this parameter, the SNMP agent is
inactive.

SNMP Trap Global State : Select Enabled from the drop down menu
o
SNMP Authentication Trap: Enable this to turn on SNMP trap for your
network
o
Port Link Up: Enable this to turn on SNMP trap settings for uplink
ports
o
Port Link Down: Enable this to turn on SNMP trap settings for
downlink ports
o
ColdStart: Enable this to turn on SNMP ColdStart function for switch
power reboot alert.
o
WarmStart: Enable this to turn on SNMP WarmStart function for
switch software reboot.