TRENDnet TPE-P521ES Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 68

TRENDnet TPE-P521ES Скачать руководство пользователя страница 4

© Copyright 2018 TRENDnet. All Rights Reserved.

TRENDnet User’s Guide

TPE-P521ES

1

Product Overview

TPE-P521ES

Package Contents

In addition to your switch, the package includes:



Quick Installation Guide

If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.

Features

5-Port Gigabit PoE+ Powered EdgeSmart Switch with PoE Pass Through, model TPE-
P521ES, is powered by a PoE+ switch or injector, no AC adapter is required. It features
two gigabit non-PoE ports, and two gigabit PoE ports to power devices such as IP
cameras, VoIP handsets, and wireless access points. Reducing unnecessary switch
complexity, this EdgeSmart switch is equipped with only the most commonly used
managed switch features. The simple web-based user interface allows you to easily
manage VLANs, QoS, and monitoring.

EdgeSmart Management

Provides an easy- to-use web-based management interface for reduced switch
configuration complexity and offers a combination of more commonly used SMB
management features for easy deployment.

Integration Flexibility

Managed features include access control lists, VLAN, IGMP Snooping, and QoS for
flexible network integration.

PoE+ Powered

No AC adapter required—this switch is powered by a PoE+ switch or injector, and
features two gigabit non-PoE ports, and two gigabit PoE ports to power devices such as
IP cameras.

«
...
2
3
4
5
6
...
»

Содержание TPE-P521ES





































































Отзывы:

Нет отзывов