TRENDnet TPE-30102WS, Руководство пользователя, Страница: 88 / 112

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-30102WS
84
PoE Scheduling
Power over Ethernet > PoE Scheduling
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Power over Ethernet and click on PoE Scheduling.
3. Enable PoE Scheduling by selecting it from the drop down menu under PoE
Scheduling Global Settings.
4. Select the port from the drop down menu that you want to schedule PoE Scheduling.
5. Review the settings below

Select all: This will enable PoE ports to send device all the time. By default this
is the automatic option.

Week: This column displays the time of day which is displayed from Sunday to
Saturday.

Hour: This row displays the time of day. The time is displayed in military time.
The time is displayed from 00 to 23 hours.
6. To select a certain day of the week with a certain time of the week, select the box
that best corresponds with your selection. To enable power to a PoE device at the same
time everyday of the week, check mark the time box below the time that you wish. .
7. Click Apply to apply the settings.
8. Click Save Settings to Flash (menu).
9. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.