TRENDnet TL2-FG142, Руководство пользователя

Страница: 31 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
26
to community string, a particular range of source addresses can be used
to restrict source subnet.
Engine ID Indicates the SNMPv3 engine ID. The string must contain an even
number(in hexadecimal format) with number of digits between 10 and 64,
but all-zeros and all-'F's are not allowed. Change of the Engine ID will clear
all original local users.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.6.2 Trap
Configure SNMP trap on this page.
Global Settings
Items Description
Mode Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Trap Destination Configurations
Configure trap destinations on this page.
Items Description
Name Indicates the trap Configuration's name. Indicates the trap destination's
name.
Enable Indicates the trap destination mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Version Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.
Trap
Community Indicates the community access string when sending SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is ASCII
characters from 33 to 126.
Destination
Address Indicates the SNMP trap destination address. It allow a valid IP address in
dotted decimal notation ('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from
the alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed,
the first character must be an alpha character, and the first and last
characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-
bit records represented as eight fields of up to four hexadecimal digits
with
a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be
used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can appear only once. It can also represent a
legally valid IPv4 address. For example, '::192.1.2.34'.
Destination
port Indicates the SNMP trap destination port. SNMP Agent will send SNMP
message via this port, the port range is 1~65535.
Button