TRENDnet TL2-FG142, Руководство пользователя

Страница: 23 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
18
User Name The name identifying the user. This is also a link to Add/Edit User.
Privilege
Level The privilege level of the user. The allowed range is 1 to 15. If the privilege
level value is 15, it can access all groups, i.e. that is granted the fully
control of the device. But others value need to refer to each group
privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most
groups privilege level 5 has the read-only access and privilege level 10 has
the read-write access. And the system maintenance (software upload,
factory defaults and etc.) need user privilege level 15. Generally, the
privilege level 15 can be used for an administrator account, privilege level
10 for a standard user account and privilege level 5 for a guest account.
Button
Click to add a new user.
4.3.5.2Privilege Levels
This page provides an overview of the privilege levels.
Items Description
Group Name The name identifying the privilege group. In most cases, a privilege level
group consists of a single module (e.g. LACP, RSTP or QoS), but a few of