© Copyright 2015 TRENDnet. All Rights Reserved.
36
TRENDnet User’s Guide
TEW-734APO
Basic Setting
This page displays thin access points connected in the network.
1. Log into the management page (see “
” on page 9).
2. Click on Thin AP and
Basic Settings
.
General Settings
Device Mode: Select the mode you would want the access point to operate on.
Device Name: Enter
a device name that can help distinguish each devices
IP Settings
DHCP Client:
Select this option to set the access point to obtain DHCP you’re your
DHCP server.
Static:
Select this option to manually configure the access point’s IP address.
o
IP Address:
Enter the IP address to assign
o
Subnet Mask:
Enter the subnet mask of the access point
o
Gateway IP Address:
Enter the gateway IP address
o
DNS1-2:
Enter the DNS IP address to assign on the access point.
Access Control Mode
LAN:
Select when your access controller is connected on your LAN (Local Are
Network).
Internet:
Select this option to have your access controller access the access point
via Internet and enter the elect the mode you would want the access point to
operate on.
o
Management Port:
Enter the port to assign to access the access point via
Internet
o
FW Upgrade Port:
Enter the port to use when performing upgrade through
the Internet.
VLAN
Enable 802.1 Q VLAN:
Select this option to enable VLAN
Management VLAN ID:
Enter the VLAN ID to assign the access point.
Information
This page displays thin access points configured information.
1. Log into the management page (see “
” on page 9).
2. Click on Thin AP and
Basic Settings
.
Содержание TEW-734APO
Страница 1: ...TRENDnet User s Guide Cover Page...
Страница 65: ......
