TRENDnet TEG-7080ES, Руководство пользователя, Страница: 16 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
14
TRENDnet User’s Guide
TEG-7080ES
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
Configure port mirror settings
Bridge > Mirroring
Port mirroring allows you to monitor the ingress and egress traffic on a port by having
the traffic copied to another port where a computer or device can be set up to capture
the data for monitoring and troubleshooting purposes.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Bridge , and click on Mirroring .
3. Review the settings. Click Apply to save changes.
•
Mirror Setting – Check the Enable Mirror box to enable port mirroring.
•
Mirroring Port Setting – Select desired Mirror ports and designate a Mirror To
port for traffic to be copied for data monitoring and troubleshooting
Note: The Mirror Ports and Mirror-To ports cannot belong to the same trunk group.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.