TRENDnet TEG-7080ES, Руководство пользователя, Страница: 13 / 35

© Copyright 2018 TRENDnet. All Rights Reserved.
11
TRENDnet User’s Guide
TEG-7080ES
Restrict access to switch management page
System > IP Access List
This section allows you to define or restrict access to the switch management page to a
list of specific IP addresses.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on System , and click on IP Access List .
3. Review the settings.
First, enter the IPv4 or IPv6 address to allow access and click Apply to save entries into
the IP Access List. A maximum of 5 IP addresses can be added to the IP Access List.
For each entry, the access list will populate. You can remove IP addresses from the IP
Access List simply by deleting the entries and clicking
Apply .
To limit access to your switch management page to a single user at a time, simply check
the
Limit Single User Access box and click Apply. Access to the switch management
page will automatically timeout after 5 minutes.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.
Change administrator password and add accounts
System > Administration
This section explains how to change the administrator password create additional
administrative user accounts for access to the switch management page.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on System , and click on Administration .
To change the administrator password, first enter the current password and then enter
and confirm the new password in the avaliable cells. Click
Apply to save the new
password.
Note: The password consists of up to 12 alphanumeric characters.
4. Click Apply to save configuration changes to the NV-RAM to ensure that if the switch
is rebooted or power cycled, the configuration changes will still be applied.