The TE-TT Ethernet transceiver is IEEE 802.3 standard
Attachment Unit Interfaces (AUI) that provides quick and easy
attachment from a host to any Ethernet media types, including
thin coax, 10Base-T unshielded twisted-pair and optic fiber.
The transceiver is attached to the host via a DB-15 AUI
connector.
Using VLSI transceiver chips for high hardware reliability, the
TE-TT transceiver also provides heartbeat, jabber and
isolation voltage. To enhance installation compatibility, a SQE
jumper is added for selection of the Heartbeat function as well
as diagnostic LEDs as standard features.
TE-TT
AUI-to-RJ-45 Transceiver
Comply with IEEE 802.3 and Ethernet 1.0/2.0
specifications
Selectable SQE (heartbeat) enable/disable
Isolation voltage between network cable and transceiver
cable
Directly attach to host's AUI connector without transceiver
cable
10Mbps transfer rate
5 Year Warranty
FEATURES
PRODUCT INFORMATION
TE-T2:
AUI-to-BNC Transceiver
TE-TT:
AUI-to-RJ-45 Transceiver
TE-TF:
AUI-to-ST Transceiver
TE-TFT:
UTP to ST Transceiver
for Fiber Optic Cable
TE-TC:
BNC-to-UTP Transceiver
To Order Please Call:
1-888-326-6061
ORDERING INFORMATION
ORDERING INFORMATION
SPECIFICATIONS
Standards:
IEEE 802.3 Ethernet standard
Diagnostic LEDs:
Transmit, receive, collision, jabber
•
•
TE-TT (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
Email: [email protected]
www.TRENDNET.com
