- 8 -
SOFTWARE INSTALLATION FOR
NOTEBOOK PC
Installation for Windows 95
The installation procedures for the network
driver may vary slightly depending on the
version of Windows 95 you are using and also
your current system configuration.
1. Once the
PCMCIA Fast Ethernet PC
Card
is connected to your computer,
Windows 95 will automatically detect the
new hardware device as shown below.
Insert the program diskette #1 into your
floppy drive.
2. Click
Next
. When the
PCMCIA Fast
Ethernet PC Card
message appears, click
Finish
. The Installation program will
continue to copy the necessary files into
your computer.
3. Follow the on-screen instruction to proceed.
If Windows asks you to supply your original
Windows 95 installation or setup files, insert
the CD-ROM or disks as requested, and
direct Windows 95 to the proper location.
4. When asked if you want to restart your
computer, click
Yes
.
Installation for Windows 98
1. Once the
PC Card
is connected to your
computer, Windows 98 will automatically
detect the new hardware device as shown
below. Click
Next
.