5.4.1 Camera Channel
Select camera channel for apply camera setting. Select [ALL] for apply to all channels.
5.4.2 PTZ Protocol
Select PTZ device protocol. Support CLT-618, JY2000, Philip, Pelco-D, Pelco-P, Panasonic,
Samsung, SYYT, TD500, Tiandy, VIDO, VTS, YAAN, Yiboer and etc.
5.4.3 PTZ Baud Rate
Select PTZ device baud rate. Support 1200, 2400, 4800, 9600.
5.4.4 PTZ ID
Select PTZ device ID. From 0~255.
5.4.5 Color Setting
Adjust camera color attribute, by default the value is 8.
Brightness: 1 ~ 16
Contrast: 1 ~ 16
Hue: 1 ~ 16
Saturation: 1 ~ 16
5.4.6 Motion Detection & Region
Sensitivity of motion detection
There are three level sensitivity of motion detection.
Highest
Normal
Low or Disable
Configure motion detection by region.
Press
【
>>
】
on screen to pop up sub windows for region setting.
There are totally 16 x 12 individual blocks for a camera view. Each block can be turn on or off
by single mouse left-click.
38
