2.
Speed display, GPS signal
1.
When GSP signal is weak,
will be lighted in red, the screen display “--” and flash.
2.
When GPS signal is OK, the screen displays running speed.
3.
Overspeed attention(ATTN) and alarm
a) When running speed is up to ATTN value,
will be lighted in yellow, and sound “BI”
once.
b) When running speed is up to ALARM value,
will be lighted in red, and sound “BI”
twice.
4.
Peak speed setting
Press
by 2 seconds,
will be lighted in red, display Max Speed during running. Press
MENU”, “SET” or exit to confirm.
5.
LED test
Press “SET” by 2 seconds, all LEDs will be lighted one by one. Exit testing by press “MENU” or
“SET”, or no press within 20 seconds.
Setting method
Press “MENU” and “SET” to set, the setting data will be flashing, then press “
” and “
”
to revise parameter, press “SET” and sound “BI” to finish setting. No press within 20
seconds, exit setting automatically.
1.
Brightness
Press “MENU” and lighten
, start setting by press “SET”. Press
or
to revise
value, finish setting by press “SET”. Brightness range is 0~7, 0 is the most darkness, 7 is the
most brightness.
2.
Volume
Press “MENU” and lighten
, start setting by press “SET”. Press
or
to revise
value, finish setting by press “SET”. Volume range is 0~3, 0 is silence, 3 is the max.
3.
Speed calibration
Press “MENU” and lighten
, start setting by press “SET”. Press
or
to revise
value, finish setting by press “SET”. Range is 0~3, 0 is silence, 3 is the max.
