12
English
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS.
1.
To protect against risk of electrical hazards, do not immerse the Comfortice Ice Crusher in water or other
liquids.
2.
Unplug from outlet when not in use, before assembling or disassembling, and before cleaning.
3.
Avoid contacting moving parts. Never place fingers or other utensils into feed or discharge areas.
4.
The Comfortice Ice Crusher has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit, contact a qualified
electrician. Do not modify the plug in any way.
5.
Do not operate the Comfortice Ice Crusher or any electrical equipment with a damaged cord or plug, or after
the unit malfunctions, is dropped or damaged cord or plug, or after the unit malfunctions, is dropped or
damaged in any manner. Return it to the nearest authorized service facility for examination, repair or
adjustment.
6.
When the Comfortice Ice Crusher is used by or near children, close supervision is necessary.
7.
Do no use outdoors.
8.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
9.
Check feeder chute for presence of foreign objects before using.
10.
Use only attachments that are included in the packaging of the Comfortice Ice Crusher. The use of other
attachments may cause fire. Electric shock or injury.
11.
Put this list in a safe place, do not discard.
USE
1.
Place the Ice Crusher (clear bowl) packed with the unit under the bottom opening of the ice crusher. Plug the
unit in and set the ON/OFF power switch to the ON position. NOTE: Ice crusher will not operate unless Ice
Container is secured into position.
2.
To begin crushing ice, drop cubes into feeder chute opening on
3.
top of unit. Blades of crusher unit are self feeding. DO NOT ATTEMPT TO PUSH CUBES INTO BLADES WITH
HAND OR INSTRUMENT.
4.
If a large cube should become lodged in the crushing unit so that blades cannot reach it, set power switch to
the OFF position and unplug unit from outlet.
Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug unit back into
outlet, set the power switch to the ON position, and resume feeding cubes through the feeder chute.
PARTS
1
1. ice Chute
2. Housing
3. Switch
4. Ice Container (3 liter capacity)
2
3
