background image

2 • SLASH 4x4

INTRODUCTION

Thank you for purchasing the Slash 4X4 equipped with the 
Velineon

®

 Brushless Power System. The Velineon Power System 

lets you experience the best that brushless motor technology has 
to offer. Incredible speed, efficient operation, long run times, and 
low-maintenance operation are just some of the benefits. We are 
confident you will be rewarded with high-speed performance in a 
durable, long-lasting product.

This manual contains the instructions you will need to operate and 
maintain your model so that you can enjoy it for years to come. 
We want you to feel confident that you own one of the best-
performing models in the market and that it is backed by a team 
of professionals who aim to provide the highest level of factory 
support possible. Traxxas models are about experiencing total 
performance and satisfaction, not just with your model, but also 
with the company that stands behind it. 

We know you’re excited about getting your new model on 
the road, but it’s very important that you take some time to 
read through the Owner’s Manual. This manual contains all the 
necessary set-up and operating procedures that will allow you to 
unlock the performance potential that Traxxas engineers designed 
into your model. Also be sure to read and follow the precautions 
and warnings in this manual and on any labels or tags attached to 
your model. They are there to educate you on how to operate your 
model safely and also get maximum life and performance from 
your model.

Even if you are an experienced R/C enthusiast, it’s important to 
read and follow the procedures in this manual. 

Thank you again for going with Traxxas. We work hard every day 
to assure you receive the highest level of customer satisfaction 
possible. We truly want you to enjoy your new model!

Traxxas Support

Traxxas support is with you every step of the 
way. Refer to the next page to find out how to 
contact us and what your support options are.

Quick Start

This manual is designed with a Quick 
Start path that outlines the necessary 
procedures to get your model up 
and running in the shortest time possible. If you are an 
experienced R/C enthusiast you will find it helpful and fast. 
Be sure and read through the rest of the manual to learn 
about important safety, maintenance, and adjustment 
procedures. Turn to page 7 to begin.  

3

  BEFORE YOU  

PROCEED

4

  SAFETY  

PRECAUTIONS

5

  TOOLS, SUPPLIES AND 

REQUIRED EQUIPMENT

6

  SLASH 4x4

7

  QUICK START:  

GETTING UP TO SPEED

8

  TQ 2.4GHz RADIO AND 

VELINEON BRUSHLESS 
POWER SYSTEM

16

 ADJUSTING THE 

ELECTRONIC SPEED 
CONTROL

18

  DRIVING YOUR MODEL

20

 BASIC TUNING 

ADJUSTMENTS

22

 MAINTAINING  

YOUR MODEL

24

 ADVANCED TUNING 

ADJUSTMENTS

28

 TQ 2.4GHz ADVANCED 

TUNING GUIDE

TABLE OF CONTENTS

Содержание Slash 4x4 6808

































Отзывы: