28 Operation
© Travis Industries
4120309
100-01287_000
Direct Operation
The fireplace may be directly operated from the receiver. The three positions are below (see Figure 2):
ON
– Burner turns on (regardless of transmitter settings).
OFF
– Burner turns off (regardless of transmitter settings).
REMOTE
– Burner is controlled by the transmitter.
Figure 2
NOTE
: When the receiver switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the receiver “remembers” the
last setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see “Mode Controls” on page 32). The thermostat and burner on/off operating functions will not work on
the transmitter.
ON
REMOTE
OFF
PRG