Traub TNX65/42, Руководство по установке, Страница: 61 / 66

61
10.2016
TNX65/42
Alignment, component installation and commissioning
Secure machine to the floor
The machine can be secured to the floor if necessary. The following parts are
enclosed with the accessories for this purpose:
• 2 retaining brackets, Article No. 469193
• 2 rings, Article No. 687403
• 2 dowel pins, Article No. 318181
• Screw the two retaining brackets (Article No. 469193) to the right and left-
hand sides of the bottom box. The brackets must lie squarely on the founda-
tions.
• Using a dia. 18 mm stone drill, drill a hole 110 mm deep through each of the
retaining brackets.
• Fit the ring (Article No. 687403) under the screw head of the dowel pin and
insert the dowel pin (Article No. 318181) in the hole. The machine is an-
chored to the foundations by tightening down the hex bolt with the specified
torque (approx. 80 Nm).
469193 Bracket
318181 Dowel pin
687403 Ring
Bottom box