Traub TNL20, Руководство по эксплуатации

Страница: 50 / 74

50
Transport and installation
TNL20
DTE022DE - 24.06.2021
Transporting the machine
Transporting machine to installation site
Transport the machine to its installation site or move it into the position required
for installation and secure it so that it cannot roll away inadvertently.
• Apply the hydraulic jacks to the machine as described earlier.
• Evenly lift the machine with the hydraulic jacks.
If using 2 hydraulic lifts, first evenly lift the side of the machine
with the steerable transport roller until the transport roller can be
pulled out.
Set the machine down to the point that the footplates (3) can still be slid
under the bearing points / adjusting screws (1) .
Ensure that the adjusting screws are lined up with the recesses in the foot-
plates.
• Lower the machine slowly and evenly onto the footplates (3) .
2
1
3
If using 2 hydraulic jacks, repeat the process on the side of the ma-
chine with the rigid transport rollers.
• Unscrew the hexagon lock nuts (2) from the adjusting screws (1) .
• Detach transport supports and keep them for any later transport.