Traub TNL20, Руководство по эксплуатации

Страница: 46 / 74

46
Transport and installation
TNL20
DTE022DE - 24.06.2021
Transporting the machine
Technical requirements – transport rollers
Height mm max. 110
Steerable mm max. 610 x 520
Capacity: kg up to 12000
e.g., transport rollers type F6 and L6, by GKS, for loads up to 12 t
After removing the planks, the machine can also be lowered onto rollers and
transported to its installation site and/or moved into the position required for
installation.
The transport supports necessary for this can be found in the accessories to
the machine.
• Screw the 4 adjusting screws (1) in to the same depth and lightly counter
them with hex head lock nuts (2) (the adjusting screws can be found in the
accessories in the chip conveyor or the chip pan).
Set the machine down onto the adjusting screws (the transport supports
must fit under the machine for mounting).
The adjusting screws can be found in the accessories in the chip conveyor
or the chip pan.