Traub TNL20, Руководство по эксплуатации

Страница: 39 / 74

39
Transport and installation
TNL20
DTE022DE - 24.06.2021
Transporting the machine
Loading guard
The load must be secured against slipping by the methods
listed below.
Non-slip rubber mats
• The load must be secured against slipping using anti-slip rubber
mats (thickness 9 mm) between the loading surface and wooden
planks at the 4 (or 6) support points of the machine.
Wooden planks
• The two wooden planks (2000 mm long) must be wider than the
machine to improve its stability.
• The two wooden planks should only rest on the non-slip rubber
mats at the outer bearing points of the machine.
The wooden planks should not rest on the loading platform in the
middle.
If the wooden planks sag in the middle and rest on the loading
platform, nonslip rubber mats must also be fitted there.
TNL20-9 / TNL20-11
Illustrations show examples
4 (or 6) non-slip rubber mats, 9 mm thick
Truck loading platform
Wooden plank approx. 2000 mm long