manualshive.com logo in svg

Traub TNL20, Руководство по эксплуатации

Поделиться
Скачать
Traub TNL20 Скачать руководство пользователя страница 33

33

Transport and installation

TNL20
DTE022DE - 24.06.2021

Transporting the machine

Packaging of the machine, the machine components and accessories

 

• Machine incl. control cabinet mounted on planks. 

(The adjusting screws must be removed first)  

For the TNL20 with the iXcenter option, 2 transport feet (P/N 

12036622) need to be fitted in addition.

 

• Machine components and accessories are placed and fastened on pallets

The control cabinet contains: 

•  The necessary logs such as geometry or safety log 

•  Installation plan 

•  Key for the operating panel 

•  Key for the fire protection system  

(depending on the machine configuration) 

The chip conveyor or the chip pan contains: 

•  Footplates (4x) 

•  Adjusting screws (4x)

•  Screw-on brackets with threaded rods and mortar cartridge (2x)

•  Operator tools ( such as special keys) 

•  User documentation 

Wooden plank approx. 2300 mm long

Illustrations show examples

Содержание TNL20











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды