Traub TNL12.2, Руководство по эксплуатации

Страница: 22 / 62

22
Transport, Installation, Commissioning
TNL12.2
DTE070EN - 15.09.2021
Transporting the machine
Attaching the machine to the lifting device
The machine must be suspended horizontally from the crane.
• Position the crane with the lifting device above the machine and attach the
two safety hooks (5) to the load rings (3).
If necessary, the lifting device must be adjusted to match the
machine (depending on the configuration).
For this purpose, the attachment position of the upper load beam
(6) and the position of the load ring (3) on the lateral load beam
(4) can be changed.
Danger from falling machine/parts
The lifting device may only be adjusted when it is not in use.
Lifting device default setup
6 Stop pin with axial lock
5
3
4 3 5