TRASSIR TR-D4D2, Руководство пользователя

Страница: 53 / 151

CHAPTER 1. INTRODUCTION
1.2 Safety instructions
Please, read this manual before connecting and setting up your IP camera.
Check the conformity of the input voltage with the passport details and make sure that the
power source is operatig properly.
Use network filters or UPS to increase the reliability of the IP-camera, protect against
voltage drops, and ensure uninterrupted power supply.
Do not expose the IP camera to high pressure, shaking, mechanical shock, or strong
electromagnetic radiation. Avoid installing the equipment on surfaces subject to
vibrations, as this may damage it. When transporting, the IP camera must be placed in its
original packaging or packaging the device safety.
Do not touch the sensor module. If necessary, use a clean cloth with a small amount of
ethanol. The operation of the sensor may be disrupted by the laser ray, so when using any
laser equipment, make sure that the rays do not hit the surface of the matrix. Do not aim
the camera at the sun or very bright areas. This can lead to loss of image clarity, and can
significantly shorten the life of the sensor module.
Do not expose the camera to extremely high or low temperatures (you can see the
specification in the device datasheet).
Do not use the device in dirty rooms with high humidity, as this may result in a fire or an
electrical short circuit. Free air exchange is required for proper camera operation.
Do not expose the equipment to direct sunlight. Do not place it near heat sources such as
a stove, heater or radiator (it may result in fire).
The IP camera mounted on a wall or ceiling must be securely fixed.
If case of IP camera malfunction, contact your supplier or the nearest service center. Do
not attempt to repair the camera by yourself. (The manufacturer declines the warranty
obligations for damages resulting from unauthorized repairs or maintenance.).
User manual for TRASSIR IP cameras 53