TRASSIR TR-D4D2, Руководство пользователя

Страница: 118 / 151

CHAPTER 3. TRASSIR IP CAMERA CONFIGURATION
Press Reset to reset current detections settings.
Press Clear to remove the current area.
3.3.6.5 «Human Detection» tab
NOTE.
Before starting the setup, make sure that the camera is installed correctly for the proper
operation of the video analytics module. Check Supplement E. IP Camera placement or
camera installation recommendations.
Got to the Human Detection tab to open the human detector settings.
Specify the zone in the preview window in which the human detection will be performed
using left mouse button.
Press
Full Screen to highlight the entire area available in the preview window as the human
detection zone.
Setting Description
Confidence Set the detector confidence threshold, from 0 to 100 . The higher the value is,
the lower is the probability of false alarms of the detector, especially when
operating outpoors.
Target mask Set the flag to make the human figure on the video stand out with a frame
when the detector is triggered.
Scene mode Select the detector's operation mode: Indoor human or Outdoor human .
Press Save to save the settings.
118 User manual for TRASSIR IP cameras