Installation Requirements and Recommendations
Chapter 3
Installing and Connecting an MP
17
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
1
Open the carton and carefully remove the contents, if you have not already
done so.
2
Place the packing materials back in the carton and save the carton.
3
Verify that you received each item in the previous list. If any item is missing
or damaged, contact Trapeze Networks.
Installation Requirements and
Recommendations
For best results, follow these requirements and recommendations before installing
an MP access point.
RingMaster Network Plan and Work Orders
If you are using RingMaster to plan your Trapeze Networks Mobility System
installation, you might want to create and verify a network plan for the entire
Trapeze network installation and generate an MP work order, before installing MP
access points. A network plan and the MP work orders generated from it provide
the following information about MP access point installation and configuration:
●
Number of MP access points required for adequate WLAN capacity in each
coverage area
●
Detailed installation location for each MP access point
●
Settings for all MP access points in the WLAN
(For information about installing RingMaster, creating and verifying a network
plan, and generating an MP work order, see the
Trapeze RingMaster
Administrator’s Guide
.)
