232323
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-23
TR-SL2 Series
Tranzeo Wireless Technologies
Networking Advanced
In this tab you can configure the advanced networking settings. There are
different options if you are in Bridge or Router mode.
Bridge Mode
* Enabling VLAN will make the radio only accessible on the defined VLAN.
**Note:
Many Ethernet devices do not auto-negotiate properly. If you see large numbers of
dropped pings, you may have collisions. Try locking the device at 10/half as a
troubleshooting step. If the packet losses stop, step up to 100/full. If the device the
radio is connecting to cannot support 100/full, you should replace the device or
place a switch in line.
Cloning MAC Address:
This feature allows the radio to copy the MAC address
of the device you have connected to the network. This
is useful when you change your device and don‘t want
to register a new MAC address, or when dealing with
some PPPoE and Radius implementations. To clone a
MAC address, check the
MAC Address
box and enter
the MAC address in the field
Cloning into
. Uncheck
to restore the original MAC address.
NOTE:
When the device is cloning a MAC address, it
can only be managed from the LAN side.
Enable VLAN:
Enables and sets the management VLAN on the radio.
Ethernet Port Speed:
Set as
Auto
by default.**
