777
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-7
TR-SL2 Series
Tranzeo Wireless Technologies
Link Distance:
This is the distance between the CPE and access point.
This setting is necessary to define the correct ACK
timing. Setting this value too low or too high will
result in low throughput and high retries.
Power Cap:
It is the maximum output power of the radio.
Country:
Select the country where the device is located. Setting
an incorrect country may be considered a violation of
the applicable law, as rules differ in each country.
Antenna Gain:
Select the gain of the antenna. This information must
be set by the installer at the time of installation.
Supported Tx Rates:
Select the rates at which you the radio will transmit.
*indicates basic rates. All Basic rates supported by the
AP must also be supported by the CPE or it will
prevent association.
