Transmitter Solutions TS-NX/CL Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 54

background image

TRANSMITTER SOLUTIONS WARRANTY

The warranty period of this Transmitter Solutions product is twenty-four (24) months. This warranty shall
begin on the date the product is manufactured. During the warranty period, the product will be repaired or
replaced (at the sole discretion of Transmitter Solutions) if the product does not operate correctly due to a
defective component. This warranty does not extend to (a) the product case, which can be damaged by
conditions outside the control of Transmitter Solutions, or (b) battery life of the product. This warranty is
further limited by the following disclaimer of warranty and liability:

EXCEPT AS SET FORTH ABOVE, TRANSMITTER SOLUTIONS MAKES NO WARRANTIES REGARDING THE GOODS, EXPRESS OR
IMPLIED, INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. BUYER
MAKES NO RELIANCE ON ANY REPRESENTATION OF TRANSMITTER SOLUTIONS, EXPRESS OR IMPLIED, WITH REGARD TO
THE GOODS AND ACCEPTS THEM “AS-IS/WHERE-IS”. TRANSMITTER SOLUTIONS SELLS THE GOODS TO BUYER ON
CONDITION THAT TRANSMITTER SOLUTIONS WILL HAVE NO LIABILITY OF ANY KIND AS A RESULT OF THE SALE. BUYER
AGREES THAT TRANSMITTER SOLUTIONS SHALL HAVE NO LIABILITY FOR DAMAGES OF ANY KIND, WHETHER DIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING INJURIES TO PERSONS OR PROPERTY, TO BUYER, ITS
EMPLOYEES OR AGENTS, AS A RESULT OF THE SALE. BUYER ALSO AGREES TO HOLD TRANSMITTER SOLUTIONS
HARMLESS FROM ANY CLAIMS BUYER, OR ANY THIRD PARTY, MAY HAVE AS A RESULT OF BUYER’S USE OR DISPOSAL OF
THE GOODS. BUYER HAS READ THIS DISCLAIMER AND AGREES WITH ITS TERMS IN CONSIDERATION OF RECEIVING THE
GOODS.

«
...
52
53
54

Содержание TS-NX/CL























































Отзывы:

Нет отзывов

Похожие инструкции для TS-NX/CL

Бренд: JBL Страницы: 2

Бренд: WAGO Страницы: 56

Бренд: iSP Technologies Страницы: 10

Бренд: Aiphone Страницы: 2

Бренд: Tyco Fire Product Страницы: 8

Бренд: Harman Страницы: 30

Бренд: DOLD Страницы: 20

Institutional Series I-35

Бренд: Hunter Страницы: 2

Бренд: Daewoo Страницы: 21

Бренд: DAEWOO ELECTRONICS Страницы: 7

Бренд: Tyco Страницы: 8

Бренд: Contec Страницы: 62

Бренд: Technics Страницы: 14

Бренд: Electro-Voice Страницы: 4

Бренд: GAS Страницы: 2

Бренд: MAJORITY Страницы: 26

Бренд: MAJORITY Страницы: 38

Бренд: Genelec Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды