P a g e
|
12
Connect the PC (Personal Computer) and the device with net cable and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx
can be 0 to 255 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the Encoder
’s IP address in the
browser’s address bar and press Enter.
It will display the Login interface. Input the Username and Password (Both the default
Username and Password are
“admin”.) and then click “LOGIN” to start the device setting.
3.2
OPERATION
Welcome
When we confirm the login, it displays the WELCOME interface as Figure-2.
Figure-2
User can click any item
here to enter the
corresponding interface
to check information or
set the parameters.
System information
