Publication date: Nov, 2014
Revision A1.1
27
Check the port
configuration.
A port on your Switch may not be operating as you expect
because it has been put into a “blocking” state by
Spanning Tree, GVRP (automatic VLANs), or LACP
(automatic trunking). (Note that the normal operation of
the Spanning Tree, GVRP, and LACP features may put the
port in a blocking state.) Or, the port just may have been
configured as disabled through software.
Table 10: Troubleshooting Chart
Symptom
Action
System LED is Off
◆
Check connections between the switch, the power
cord and the wall outlet.
◆
Contact your dealer for assistance.
Link LED is Off
◆
Verify that the switch and attached device are
powered on.
◆
Be sure the cable is plugged into the switch and
corresponding device.
◆
If the switch is installed in a rack, check the
connections to the punch-down block and patch
panel.
◆
Verify that the proper cable type is used and its length
does not exceed specified limits.
◆
Check the adapter on the attached device and cable
connections for possible defects. Replace the
defective adapter or cable if necessary.
