Transition Networks •
User Guide | 9
33644 Rev. B
Installation Overview
1.
Plug the TN-USB3-xx-
01 to the PC’s USB 3.0 port. If it works
(LEDs lit and device
detected), you do not need to perform additional steps. If there is a problem with
operation, continue with the rest of the steps below.
2.
Procure and load the latest AX88179 driver from ASIX. See
Available Drivers
below.
3.
Procure and load the latest driver for the PC’s USB 3 H
ost Controller(s), either from
the OS provider or the Host Controller chipset manufacturer (e.g.,
).
4.
Reboot the PC and try again.
5.
Be patient. The first time you plug in the TN-USB3-xx-01, it may take 2 full minutes
for the driver to install, before it begins working.
6.
Disable
and
Driver Installation
Available Drivers
The ASIX
provide these driver packages:
Select the appropriate driver package and unzip it.
Each driver package has a
Readme.txt
file that describes the driver's configurable parameters. Each driver package
has a
History.txt
file that says you must first uninstall any older version driver setup
program, and also provides a version history for the particular driver setup program.
The supported downloaded drivers have these filenames:
1.
AX88179_178A_LINUX_DRIVER_v1.14.4_SOURCE.zip
2.
AX88179_178A_Macintosh_10.6_to_10.12_Driver_Installer_v2.8.0_20160912.zip
3.
AX88179_178A_Win7_32bit_Driver_v1.12.11.0_WHCK.zip
4.
AX88179_178A_Win7_64bit_Driver_v1.14.11.0_WHCK.zip
5.
AX88179_178A_Win7_v1.x.11.0_Drivers_Setup_v3.0.3.0.zip
6.
AX88179_178A_Win10_8.x_32bit_Driver_v1.18.2.0_WHCK.zip
7.
AX88179_178A_Win10_8.x_64bit_Driver_v1.18.2.0_WHCK.zip
8.
AX88179_178A_Win10_8.x_v1.18.2.0_Drivers_Setup_v1.0.0.0.zip
