User’s Guide
SBFTF10xx-15x
Stand-Alone Media Converter
•
Copper to Fiber
•
10/100 Bridging (2-Port)
•
10Base-T/100Base-TX to 100Base-FX
The SBFTF10xx-15x 2-port Ethernet/Fast Ethernet
bridging media converter connects 10Base-T
Ethernet or 100Base-TX Fast Ethernet twisted-pair
copper network devices to network devices on a
100Base-FX Fast Ethernet fiber network.
SBFTF1029-150
**
RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-151**
RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-152***
RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 40 km (24.8 miles)*
SBFTF1029-153***
RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 40 km (24.8 miles)*
Part Number
Port One -
Copper
10Base-T/100Base-TX
Port Two -
Duplex Fiber-Optic
100Base-FX
SBFTF1011-150
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1013-150
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1014-150
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
20 km (12.4 miles)*
SBFTF1015-150
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
40 km (24.8 miles)*
SBFTF1018-150
RJ-45
100 m (328 ft)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
*
Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. (TX) = transmit (RX) = receive
** SBFTF1029-
150
and SBFTF1029-
151
are intended to be installed in the same
network where one is the
local
converter and the other is the
remote
converter.
*** SBFTF1029-
152
and SBFTF1029-
153
are intended to be installed in the
same network where one is the
local
converter and the other is the
remote
converter.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
