Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 69 of 669
Summary
: You can create multiple Views. You can then create multiple Groups, and associate them with
a View. You can configure multiple Groups (each with a different Group name and security level) and
associate them with a particular View. You can also configure more than one View associated with a
Group (e.g., a Group with read access to the entire MIB tree, but with only write access to certain
objects). You could then create multiple Users, and associate them with a Group (you can associate
multiple Users with a particular Group).
With SNMPv3 you can define SNMP views, groups and users to provide access control to SNMP devices,
as shown below.
Figure 1.SNMP v3 Users, Groups, and Views
You can create multiple Views. You can then create multiple Groups, and associate them with a View.
You can configure multiple Groups (each with a different Group name and security level) and associate
them with a particular View. You can also configure more than one View associated with a Group (e.g., a
Group with read access to the entire MIB tree, but with only write access to certain objects). You could
then create multiple Users, and associate them with a Group (you can associate multiple Users with a
particular Group).
