Transition Networks S4224 Скачать руководство пользователя страница 603

Страница: 603 / 669

33558 Rev. C

https://www.transition.com

Page 603 of 669

Appendix B - Licenses

This appendix provides S4224 license information. At the

Monitor

System

Information

menu path

you can click the

Acknowledgments > Details

link to display the current set of source code from the

various Open-Source components.

NOTICE

This system contains source code from the following Open-Source components. Some code has been altered to work

with the embodying system.

CPU-load: SVG graph

Dropbear: SSH Server

Host AP: EAPOL Authenticator and RADIUS authentication server

ISC DHCP: DHCP Relay

MD5: MD5 hash implementation

MooTools: JavaScript Framework

NET-SNMP: SNMP Agent

NET-SNMP RMON: NET-SNMP RMON utilities

NTP - Network Time Protocol: NTP Protocol

OpenSSL: Toolkit implementing SSL v2/v3 and TLS protocols

WPA Supplicant: EAP Peer state machines for MAC-based Authentication

avltree: Self-balancing binary search tree

eCos RTOS: Real-time OS for embedded applications

libfetch: A library for retrieving and uploading files using Uniform Resource Locators (URLs).

Name CPU-load

Description

SVG graph

License type

BSD

and Jonathan Watt <[email protected]>.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

2. Redistributionss in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,

OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Name Dropbear

Description

SSH Server

License type

MIT, BSD, OpenSSL

Dropbear contains a number of components from different sources, hence there

are a few licenses and authors involved. All licenses are fairly

non-restrictive.

Содержание S4224






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды

Transition Networks S4224, Руководство пользователя для веб

Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды