Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 49 of 669
System Users Configuration
Configuration > Security > Switch > Users
The
Configuration
>
Security
>
Switch
>
Users
menu path lets you view and configure the system
users that are allowed to access the web pages or log in from CLI.
You can also access the S4224 System Password page from the
Configuration
>
Security
>
Switch
>
Users
menu path.
This page provides an overview of the currently defined system users. Currently the only way to login as
another user on the web server is to close and reopen the browser.
User Name
Enter the new user’s name to be added (the name identifying the user). This is also a link to Add, Edit
or Delete an existing User.
Privilege Level
Enter the new user’s level of access to be allowed. This is the privilege level of the user. The valid
range is
1
-
15
.
If the privilege level value is
15
, a user can access all groups (i.e., this user is granted the fully control
of the device). But others value need to refer to each group privilege level. User's privilege should be
same or greater than the group privilege level to have the access of that group.
The system maintenance (software upload, factory defaults and etc.) requires user privilege level 15.
By default, most groups’ privilege level
5
has read-only access and privilege level
10
has read-write
access. Generally, privilege level
15
can be used for an administrator account, privilege level
10
for a
standard user account, and privilege level
5
for a guest account.
Buttons
Add New User
: Click to add a new user to the Users Configuration table.