Transition Networks S4224 Скачать руководство пользователя страница 284

Страница: 284 / 669

Transition Networks

S4224 Web User Guide

33558 Rev. C

https://www.transition.com

Page 284 of 669

Group to VLAN

The

Configuration

VCL

Protocol-based VLAN

Group to VLAN

menu path lets you configure the

S4224 ‘Group Name to VLAN mapping table’ settings. This page lets you map an existing, configured

Group Name to a VLAN for the selected switch. At default, the table displays “

No Group entries

”.

Click the

Add New Entry

button to display the entry fields.

The displayed settings are explained below.

Delete

To delete a Group Name to VLAN map entry, check this box. The entry will be deleted from the

S4224 at the next Save.

Group Name

A valid Group Name is a string of up to 16 characters which consists of a combination of alpha (a-z or

A-Z) and numeric (0-9) characters; no special characters are allowed. Whichever Group name you try

map to a VLAN must be present in the Protocol to Group mapping table (see above) and must not

already be used by any other existing mapping entry on this page.

VLAN ID

Indicates the VID to which Group Name will be mapped. A valid VLAN ID ranges from 1-4094.

Port Members

A row of checkboxes for each port is displayed for each Group Name to VLAN ID mapping. To

include a port in a mapping, check the box. To remove or exclude the port from the mapping, make

sure the box is unchecked. By default, no ports are members and all boxes are unchecked. At least

one Port Member checkbox must be checked.

Add New Entry (Add a New Group to VLAN mapping table)

Click the

Add New Entry

button to add a new entry in the mapping table. An empty row is added to

the table; configure the Group Name, VLAN ID and port members as needed. The valid VLAN ID

values are

4094

The ‘

Reset’

button can be used to undo the addition of new entry.

Содержание S4224






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды

Transition Networks S4224, Руководство пользователя для веб

Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды