Transition Networks, Inc.
PCVT-48VDC-53VDC Install Guide
33568 Rev. A
Page 3 of 18
Safety
Before installing the PCVT, read this section and ensure that the requirements noted are met.
Cautions and Warnings
Definitions
Cautions
indicate that there is the possibility of poor equipment performance or potential damage to the
equipment.
Warnings
indicate that there is the possibility of injury to a person.
Cautions and Warnings appear here and may appear throughout this manual where appropriate. Failure to
read and understand the information identified by this symbol could result in poor equipment
performance, damage to the equipment, or injury to persons.
Cautions
Do not
ship or store devices near strong electrostatic, electromagnetic, magnetic, or radioactive fields.
Caution
: When handling chassis Network Devices observe electrostatic discharge precautions. This requires proper
grounding (i.e., wear a wrist strap).
Caution
: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3,
Video Coax, etc., are intended to be connected to intra-building
(inside plant)
link segments that are not subject to
lightening transients or power faults. They are
not
to be connected to inter-building
(outside plant)
link segments
that are subject to lightening.
Caution
:
Do not
install the devices in areas where strong electromagnetic fields (EMF) exist. Failure to observe this
caution could result in poor device performance.
Caution
: Read the installation instructions before connecting the chassis to a power source. Failure to observe this
caution could result in poor performance or damage to the equipment.
Caution
: Only trained and qualified personnel should install or perform maintenance on the
PCVT-48VDC-
53VDC
. Failure to observe this caution could result in poor performance or damage to the equipment.
CAUTION
– “Risk of Electric Shock – More than one disconnect switch may be required to de-energize
the equipment.
