Transition Networks MIL-SM2401MAF
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
97
Improper Network Topologies
It is important to make sure that the network topology is valid. Common topology faults
include excessive cable length and too many repeaters (hubs) between end nodes. In
addition, the user should make sure that the network topology contains no data path
loops. Between any two ends nodes, there should be only one active cabling path at
any time. Data path loops will cause broadcast storms that will severely impact the
network performance.
Diagnosing LED Indicators
To assist in identifying problems, the switch can be easily monitored through panel
indicators, which describe common problems the user may encounter and where the
user can find possible solutions.
If the power indicator does turn on when the power cord is plugged in, the user may
have a problem with power outlet, or power cord. However, if the switch powers off
after running for a while check for loose power connections, power losses or surges at
power outlet. If the problem still cannot be solved, please contact the local dealer for
assistance.
Diagnosing PoE problems
No Power Forward
Make sure the connected PD device complies with IEEE 802.3af standard. The
PoE switch only supports the IEEE 802.3af compliant PD.
The PoE switch uses the signal power pair to forward power, the data and the
power traverse the pin. Please check the documentation for your PD device to
make sure the power pair it uses. The following table is the signal power pair
RJ-45 port pin out:
