User’s Guide
J/VD-TX-01, J/VD-RX-01 and J/VD-MRX-01
Stand-Alone AM Video Copper-to-Fiber Video System
The J/VD-RX-01 standard size fiber receiver is a
companion to the J/VD-TX-01 series transmitter.
This receiver mounts into Transition’s E-MCR-04
12-position rack-mount shelf. This unit incorporates
two status LEDs: power status and fiber video RX.
It operates as a fiber receiver and a coax transmitter
to a monitor.
• Stand-alone version only
• One SC or ST fiber receiver port
• One 75-ohm BNC video transmitter port
The J/VD-MRX-01 small-form-factor fiber receiver is
a similar sized companion to the J/VD-TX-01 series
transmitter. This unit incorporates two status LEDs:
power and fiber video RX. It operates as a fiber
receiver and a coax transmitter to a monitor.
• Stand-alone version only
• One SC or ST fiber receiver port
• One 75-ohm BNC video transmitter port
Installation . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . .4
Cable Specification . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . .7
Compliance Information . . . . . . . .8
J/VD-RX-01
• AM Video
• NTSC, PAL, SECAM compatible
• Automatic gain control (AGC)
• Realtime full color video
• Plug-and-play design for easy installation
• CCTV video equipment compatible
• One-way signal transmission through the system
• Extended temperature rated for use in controlled
outdoor applications
J/VD-MRX-01
The J/VD-TX-01 fiber transmitter permits connecting a
video camera to a video monitor through multimode
(MM) or single mode (SM) fiber. Its small form factor
allows mounting directly to the camera’s coax video
output port. This unit incorporates two status LEDs:
power and coax video RX. It operates as a coax receiver
and a fiber transmitter.
• Stand-alone version only
• One SC or ST fiber transmitter port
• One 75-ohm BNC video receiver port
J/VD-TX-01
