Installation . . . . . . . . . . . . . . . . . .5
Operation . . . . . . . . . . . . . . . . . . .7
Technical Specifications . . . . . . . .8
Cable Specifications . . . . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
User’s Guide
CDFTFxxxx-10x
Slide-in-Module Media Converter
• Telco Network
• Copper to Fiber
• 100Base-TX to 100Base-FX
Transition Networks CDFTFxxxx-10x series dual-
port media converters are designed to be installed in
a CPSMC1850-150
PointSystem™
chassis. The
CDFTFxxxx-10x connects twisted-pair copper Telco
signals (received at the back of the CPSMC1850-150
chassis) to fiber-optic cable ports on each
CDFTFxxxx-10x series media converter (installed at
the front of the CPSMC1850-150 chassis).
Part Number
Copper -
Twisted-pair
Telco signals
Fiber-Optic -
Two (2) external
100Base-FX ports
CDFTF1111-100
Two (2)
internal signals
ST, 1300 nm multimode
2 km (1.2 miles)*
CDFTF1313-100
Two (2)
internal signals
SC, 1300 nm multimode
2 km (1.2 miles)*
CDFTF1414-100
Two (2)
internal signals
SC, 1310 nm single mode
20 km (12.4 miles)*
CDFTF1717-100
Two (2)
internal signals
SC, 1550 nm single mode
80 km (49.7 miles)*
CDFTF1515-100
Two (2)
internal signals
SC, 1310 nm single mode
40 km (24.9 miles)*
CDFTF1616-100
Two (2)
internal signals
SC, 1310 nm single mode
60 km (37.3 miles)*
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
