Trane XL16i, Данные о продукции

Страница: 6 / 20

6 22-1890-01
AHRI Standard Capacity Rating Conditions
AHRI STANDARD 210/240 RATING CONDITIONS —
(A) Cooling 80°F DB, 67°F WB air entering indoor coil, 95°F DB air
entering outdoor coil.
(B) High Temperature Heating 47°F DB, 43°F WB air entering out -
door coil, 70°F DB air entering indoor coil.
(C) Low Temperature Heating 17°F DB, 15°F WB air entering out -
door coil, 70°F DB air entering indoor coil.
(D) Rated indoor airflow for heating is the same as for cooling.
AHRI STANDARD 270 RATING CONDITIONS
— (Noise rating
numbers are determined with the unit in cooling operation.) Standard
Noise Rating number is at 95°F outdoor air.
Accessory Description and Usage
Anti-Short Cycle Timer — Solid state timing device that prevents
compressor recycling until 5 minutes have elapsed after satisfying
call or power interruptions. Use in area with questionable power deliv -
ery, commercial applications, long lineset, etc.
Evaporator Defrost Control — SPST Temperature actuated switch
that cycles the condenser off as indoor coil reaches freeze-up condi -
tions. Used for low ambient cooling to 30°F with TXV.
Rubber Isolators — 5 large rubber donuts to isolate condensing unit
from transmitting energy into mounting frame or pad. Use on any ap -
plication where sound transmission needs to be minimized.
Hard Start kit
— Start capacitor and relay to assist compressor mo -
tor startup. Use in areas with marginal power supply, on long linesets,
low ambient conditions, etc.
Extreme Condition Mount Kit — Bracket kits to securely mount
condensing unit to a frame or pad without removing any panels. Use
in areas with high winds, or on commercial roof tops, etc.
General
Data