Trane TX536, Установка, эксплуатация и обслуживание

Страница: 12 / 46

Tools required for installation (not provided with the unit) 1.
Level meter • saw •
electric hammer • hammer •
drill • torque wrench •
adjustable wrench • standard screwdriver •
cross head screwdriver • knife or wire stripper •
measuring tape • pressure gauge •
vacuum pump •
Connecting pipe, connecting conductor and thermal insulating material 2.
Purchase or order the connecting copper tube according to the technical data. •
The thermal insulating material shall have proper thickness, otherwise condensate water will •
drop.
Check the local electrical specifi cations and regulations as well as the special wiring instructions
•
or limitations before purchase the cable. As to the wire specifi cation, please see
Đ
Wiring
đ
in this
manual.
Other materials required for installation 3.
Pipe holder or clamp used to fi x the connecting pipe. •
Insulating cable clip or clamp used for connecting wire shall refer to the local specifi cation. •
Nuts and bolts used to install the unit to the support during installation. The fasteners meeting •
grade 4 or other nuts and locking washers closest approaching to the metric standard will be
applied. The length shall be based on the practical circumstances.
Refrigerant oil and insulating tape.
•
Putty or similar fi lling material. •
Expansion bolts. •
Refrigerant (R410A), etc. •
12 AMS-SVX01A-EN
Installation of outdoor unit