Trane TC*150-301 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 64

background image

RT-SVX25C-EN

63

Warranty

Standard Equipment Warranty Terms and Conditions Commercial
Equipment Warranty and Liability

Models Larger that 20 Tons for Commercial Use*

The Company warrants for a period of 12 months from initial start-up or 18 months from date of
shipment, whichever is less, that the Company products covered by this order (1) are free from
defects in material and workmanship and (2) have the capacities and ratings set forth in the
Company’s catalogs and bulletins, provided that no warranty is made against corrosion, erosion
or deterioration.

The Company’s obligations and liabilities under this warranty are limited to furnishing f.o.b. factory
or warehouse at Company designated shipping point, freight allowed to Buyer’s city (or port of
export for shipment outside the conterminous United States) replacement equipment (or at the
option of the Company parts therefore) for all Company products not conforming to this warranty
and which have been returned to the manufacturer.

The Company shall not be obligated to pay for the cost of lost refrigerant.

No liability whatever shall attach to the Company until said products have been paid for and then
said liability shall be limited to the purchase price of the equipment shown to be defective.

The Company makes certain further warranty protection available on an optional extra-cost basis.
Any further warranty must be in writing, signed by an officer of the Company.

The warranty and liability set forth herein are in lieu of all other warranties and liabilities, whether
in contract or in negligence, express or implied, in law or in fact, including implied warranties of
merchantability and fitness for particular use.

In no event shall the Company be liable for any incidental or consequential damages.

Trane

2701 Wilma Rudolph Blvd.

Clarksville, TN 37040-1008

Attention: Manager,Product Service

«
...
61
62
63
64
»

Содержание TC*150-301

































































Отзывы:

Нет отзывов

Похожие инструкции для TC*150-301

DUCT09HP230V1BD

Бренд: Gree Страницы: 51

Бренд: Sunbeam Страницы: 5

Бренд: TruSens Страницы: 32

DUAL INVERTER 18

Бренд: Olimpia splendid Страницы: 144

Бренд: Daikin Страницы: 17

Бренд: Daikin Страницы: 132

Бренд: MCS Страницы: 68

Бренд: Heylo Страницы: 26

NTC5/GNJ Series

Бренд: ICP Страницы: 16

ProShield Plus Ai

Бренд: Oreck Страницы: 10

Бренд: hotspot energy Страницы: 27

Бренд: ozone generators Страницы: 13

Бренд: Ozeanos Страницы: 24

Бренд: Rheem Страницы: 37

Бренд: ACPro Страницы: 41

Air Purifier 8000 Exec

Бренд: AllerAir Страницы: 2

Бренд: Daikin Страницы: 20

Бренд: Daikin Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды