Trane SENS-IN-1D18-HD60D29-4, Руководство по установке

Страница: 9 / 20

9
Option Menu
The Option Menu is used to set all programmable options
built into the ZSM. All options are retained in permanent
memory.
To display the Option Menu Screen, simultaneously press
and hold the MODE KEY and the PROGRAM KEY for 4
seconds.
When the Option Menu Screen is displayed, only the UP
and DOWN arrows and the TIME (“+”) and (“-“) KEY are ac-
tive. Pressing the UP or DOWN arrow advances to the next
available option in the menu. Pressing the TIME (“+”) and
(“-“) KEY changes the option value associated with each
option number.
Refer to the Option Menu Screen illustration and the ZSM
options and option values table with a description of each
option. Refer to this table while viewing or programming
the sensor.
Note: Changing option 9 or 10 will erase the current
program setting.
Once the option values have been reviewed or reset, simul-
taneously press and hold the MODE KEY and the PRO-
GRAM KEY for 4 seconds to return to the Normal Run
State. If no KEY is pressed, the ZSM will return to the Nor-
mal Run State after 1 minute has elapsed.
Programming And Operation