Purge Cylinder Regeneration Program
Data Sheet
The following information is required to be sent along with a tank for regeneration. In order
to ensure the proper “leak credit” for refrigerant is received, all information must be
included. This information should be written on the nameplate and stickers on the tank,
purge, and chiller.
Technician Name and #
Sales Office
Tank Sequence Number (from sticker on bottom of
tank)
Empty Weight of Cylinder (from sticker on bottom
of tank)
Refrigerant type
Chiller Model Number (1
st
12 digits)
Chiller Serial Number
Chiller Sales Order Number
Tank Order Number (or N/A), (From Nameplate)
Tank Model Number, (From Nameplate)
Tank Serial Number, (From Nameplate)
Purge minutes & date when tank was installed
Purge minutes & date when tank was removed
Purge Model Number
Purge Serial Number (or N/A)
Send Tank & Data Sheet (using supplied pre-paid label) to:
Trane Purge Cylinder Regeneration Program
350 Sunpac Court
Henderson, NV 89015
See PRG-IOM-3E for details on tank removal, packaging, shipping, and installation.
May 2001
