Trane Power Exhaust Foundation BAYPWRX320, Руководство по установке

Страница: 8 / 16

Installation
8 ACC-SVN199E-EN
9. Attach support and alignment bracket to base rail
using three screws. See Figure 8 .
10. Set the power exhaust housing adjacent to the return
duct opening.
11. Uncoil the wires and route them through the grommet
in the internal bock off (feed terminals through
bushing one at a time). See
Figure 9 .
12. Insert wire tie into closest hole in the economizer front
panel and secure the power and control wires. See
Figure 9 .
13. Install power exhaust assembly onto the side of unit
using 6 screws. See Figure 10 .
14. Using 8 screws attach horizontal return block-off to
unit end panel. See Figure 11 .
Figure 8. Install support and alignment bracket
Figure 9. Standard Economizer wire routing
8
Figure 10. Attach Power Exhaust to side of unit
Figure 11. Attach horizontal return block-off
9
12