SSA-SVX06H-EN
11
IIm
mp
po
orrtta
an
ntt:: When installing these units “free standing”
with discharge grills and isolators, a top
support with isolator should be added to
prevent tipping. Support and isolator can
be attached to a wall or other appropriate
structure.
If adding external accessories to the unit,
additional clearances must be considered
for the overall space needed.
For installation of accessories available for this air
handler, follow the installation instructions that are
shipped with each accessory.
Clearances
Allow the following minimum clearances for
serviceability:
•
Front and Back – 24 in (610 mm)
•
Sides – 22 in (559 mm) for 5 - 10 ton units and 32 in
(813 mm) for 12.5 - 25 ton units
N
No
otte
e:: See Dimensional Data for additional reference.
P
Prre
e--IIn
nsstta
alllla
attiio
on
n