AMS-SVX03A-EN
11
Installation
Indoor unit installation
Wall-mounted unit pipe arrangement sees fi g. (a) and (b) below. Cut off piping blanking at
•
the main unit base as needed (as shown in fi g. (c)) when arrange left or right pipe (wire).
- Cut off blanking 1 for leading power wires only.
- Cut off blanking 1 and 2 (or 1, 2 and 3) for leading connecting pipes and wires
-
Ɨ
,
Ƙ
and
ƙ
are recommended pipe arrangement.
Packed piping and wire are through the piping hole (as shown in fi g. (d))
•
Connect the claw at the indoor unit backside with the hanging plate hook. Move the unit to
•
check stability after installation.
Installation height should not be less than 2.0m.
•
(a)
ķ
Right piping
(c)
ĸ
Right rear piping
Ĺ
Left rear piping
Blanking 1
Blanking 2
Blanking 3
(b)
ĺ
Left pipi
Binding ba
Signal con
Drainage p
Power supply
wire
Connecting pipe
(d)
