Trane IntelliPak with Symbio 800 Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 140

background image

136

RT-SVX063G-EN

Warranty and Liability Clause

COMMERCIAL EQUIPMENT - 20
TONS AND LARGER AND
RELATED ACCESSORIES

PRODUCTS COVERED - This warranty* is extended by
Trane Inc. and applies only to commercial equipment rated
20 Tons and larger and related accessories.

The Company warrants for a period of 12 months from
initial startup or 18 months from date of shipment,
whichever is less, that the Company products covered by
this order (1) are free from defects in material and
workmanship and (2) have the capacities and ratings set
forth in the Company’s catalogs and bulletins, provided that
no warranty is made against corrosion, erosion or
deterioration. The Company’s obligations and liabilities
under this warranty are limited to furnishing f.o.b. factory or
warehouse at Company designated shipping point, freight
allowed to Buyer’s city (or port of export for shipment
outside the conterminous United States) replacement
equipment (or at the option of the Company parts
therefore) for all Company products not conforming to this
warranty and which have been returned to the
manufacturer. The Company shall not be obligated to pay
for the cost of lost refrigerant. No liability whatever shall
attach to the Company until said products have been paid
for and then said liability shall be limited to the purchase
price of the equipment shown to be defective.

The Company makes certain further warranty protection
available on an optional extra-cost basis. Any further

warranty must be in writing, signed by an officer of the
Company.

The warranty and liability set forth herein are in lieu of all
other warranties and liabilities, whether in contract or in
negligence, express or implied, in law or in fact, including
implied warranties of merchantability and fitness for
particular use. In no event shall the Company be liable for
any incidental or consequential damages.

THE WARRANTY AND LIABILITY SET FORTH HEREIN
ARE IN LIEU OF ALL OTHER WARRANTIES AND
LIABILITIES, WHETHER IN CONTRACT OR IN
NEGLIGENCE, EXPRESS OR IMPLIED, IN LAW OR IN
FACT, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR
USE, IN NO EVENT SHALL WARRANTOR BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES.

Manager - Product Service

Trane

Clarksville, Tn 37040-1008

PW-215-2688

*A 10 year limited warranty is provided on all stainless steel
Gas Heat Exchangers.

*Optional Extended Warranties are available for
compressors and heat exchangers of Combination Gas-
Electric Air Conditioning Units.

*A 5 year limited warranty is provided on optional 0-100%
Economizer

«
...
134
135
136
137
138
...
»

Содержание IntelliPak with Symbio 800













































































































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliPak with Symbio 800

Бренд: Danby Страницы: 12

Бренд: Houghton Страницы: 25

Fresh Control SAP0950WH

Бренд: Sunbeam Страницы: 7

Бренд: NateoSante Страницы: 52

Бренд: Friedrich Страницы: 74

Бренд: Lennox Страницы: 67

Бренд: EQUATION Страницы: 45

Бренд: TriStar Страницы: 12

Бренд: Enviracaire Страницы: 106

Бренд: TCL Страницы: 33

Бренд: Kelvinator Страницы: 16

FAVORITE ON-OFF Series

Бренд: Roland Страницы: 80

Бренд: Camarcio Страницы: 7

Бренд: Daikin Страницы: 48

Бренд: OBH Nordica Страницы: 40

Бренд: Zibro Страницы: 2

PureAir PCO-12C-2

Бренд: Lennox Страницы: 8

Бренд: Atlas Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды