manualshive.com logo in svg

Trane IntelliPak Signature SCRF-020, Инструкция по установке, эксплуатации и диагностике


Поделиться
Скачать
background image

6

SCXF-SVX01B-EN

Installation

Sample Unit Model Number:

S  C   W  F   N   20    4    2   BO     A    B    2      10         065          B     A    1     0    1    0    A    A    C    F     A    1     1    0     T    2    0

1   2   3   4    5   6 7   8   9  10 11  12  13  14   15 16  17 18 19  20   21  22  23  24  25  26  27   28  29  30   31  32  33  34  35  36

Model Number Description

Each IntelliPak

®

 self-contained unit has a multiple character model number unique to that unit. To determine a unit’s specific options,

reference the model number on the unit nameplate using the model number explanation below.

Digit 1 - Unit Model
S = Self Contained

Digit 2 - Unit Type
C = Commercial
I = Industrial

Digit 3 - Condenser Medium
W = Water-Cooled
R = Air-Cooled

Digit 4 - Development Sequence
F = F

Digit 5 - Refrigerant Circuit Configuration
N = Independent (Water-Cooled)
M = Manifolded (Air-Cooled)

Digit 6, 7 - Unit Nominal Capacity
20 = 20 Tons (Water or Air)
22 = 22 Tons (Water Only)
25 = 25 Tons (Water or Air)
29 = 29 Tons (Water or Air)
30 = 30 Tons (Air Only)
32 = 32 Tons (Water Only)
35 = 35 Tons (Water or Air)
38 = 38 Tons (Water Only)
40 = 40 Tons (Air Only)
42 = 42 Tons (Water Only)
46 = 46 Tons (Water Only)
50 = 50 Tons (Air Only)
52 = 52 Tons (Water Only)
58 = 58 Tons (Water Only)
60 = 60 Tons (Air Only)
65 = 65 Tons (Water Only)
72 = 72 Tons (Water Only)
80 = 80 Tons (Water Only)

Digit 8 - Unit Voltage
6 = 200 Volt/60 Hz/3 ph
4 = 460 Volt/60 Hz/3 ph
5 = 575 Volt/60 Hz/3 ph

Digit 9 - Air Volume/Temp Control
1 = IGV and Supply Air Temp Ctrl
2 = Variable Frequency Drive and Supply
       Air Temp Ctrl
3 = Variable Frequency Drive w/ Bypass
       and Supply Air Temp Ctrl
4 = w/o Vol. CTRL, w/ Zone Temp Cool
5 = w/o Vol. CTRL, w/ Zone Temp Heat/Cool
6 = w/o Vol. CTRL, w/ Supply Air Temp Ctrl

Digit 10, 11 - Design Sequence
BO = “B” Design

Digit 12 - Unit Construction
A = Vertical Discharge
B = Vertical Discharge with Double Wall
C = Horizontal Discharge
D = Horizontal Discharge w/ Double  Wall

Digit 13 - Flexible Horizontal Discharge
Plenum Type
B = Std (33”) Plenum w/Factory Cut Holes
C = Low  Plenum (24”) w/Factory Cut
Holes
E = Std Plenum w/ Field Cut Holes
F = Low Plenum w/ Field Cut Holes
H = Std Plenum Double wall  w/ Field Cut
Holes
J = Low Plenum Double wall  w/ Field Cut
Holes
K = 45” Plenum w/Factory Cut Holes,
Ship Separate
L = Std Plenum w/Factory Cut Holes, Ship
Separate
M = Low Plenum w/Factory Cut Holes,
Ship Separate
N = 45” Plenum w/Field Cut Holes, Ship
Separate
P = Std Plenum w/Field Cut Holes, Ship
       Separate
R = Low Plenum w/Field Cut Holes, Ship
       Separate
T = 45” Double Wall Plenum w/Field Cut
       Holes, Ship Separate
U = Std Double Wall Plenum w/Field Cut
        Holes, Ship Separate
V = Low Double Wall Plenum w/Field
       Cut Holes, Ship Separate
0 = None

Digit 14 - Motor Type
1 = Std Eff. ODP Motor
2 = High Eff. ODP Motor
3 = Totally Enclosed Motor

Digit 15, 16 - Motor HP
05 = 5 HP Motor
07 = 7.5 HP Motor
10 = 10 HP Motor
15 = 15 HP Motor

20 = 20 HP Motor
25 = 25 HP Motor
30 = 30 HP Motor
40 = 40 HP Motor
50 = 50 HP Motor, 460V & 575V ODP Only

Digit 17, 18, 19 - Fan RPM
040 = 400 rpm
045 = 450 rpm
050 = 500 rpm
055 = 550 rpm
060 = 600 rpm
065 = 650 rpm
070 = 700 rpm
075 = 750 rpm
080 = 800 rpm
085 = 850 rpm
090 = 900 rpm
095 = 950 rpm
100 = 1000 rpm
105 = 1050 rpm
110 = 1100 rpm
115 = 1150 rpm
120 = 1200 rpm
125 = 1250 rpm
130 = 1300 rpm
135 = 1350 rpm
140 = 1400 rpm
145 = 1450 rpm
150 = 1500 rpm

Digit 20 - Heating Type
A = Steam Coil
B = Hot Water Coil
C = Electric Heat (1 Stage)
F = Hydronic Heat Ctrl Interface
G = Elec. Heat Ctrl Interface (1 stage)
K = Steam Coil Ship Separate
L  = Hot Water Coil Ship Separate
0 = Without Heat

Digit 21 - Unit Isolators
A = Isopads
B = Spring Isolators
0 = None

Digit 22 - Unit Finish
1 = Paint - Executive Beige

General
Information

Содержание IntelliPak Signature SCRF-020













































































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliPak Signature SCRF-020

Panasonic WH-ADC0309H3E5 Operating Instructions Manual preview
WH-ADC0309H3E5
Бренд: Panasonic Страницы: 108
Fedders Room Air Conditioners Important Safety Instructions Manual preview
Room Air Conditioners
Бренд: Fedders Страницы: 12
S&S Cycle Air Cleaner Installation Instructions Manual preview
Air Cleaner
Бренд: S&S Cycle Страницы: 8
Samsung AM TN4 KH Series Installation Manual preview
AM TN4 KH Series
Бренд: Samsung Страницы: 40
Marvair AVHA 12 series Installation & Operation Manual preview
AVHA 12 series
Бренд: Marvair Страницы: 44
Gree GMV-NDX42P/A-T Owner'S Manual preview
GMV-NDX42P/A-T
Бренд: Gree Страницы: 28
COMFORT-AIRE WYB-363 Installation And Operating Instructions preview
WYB-363
Бренд: COMFORT-AIRE Страницы: 5
Montgomery Ward AW121005E Instruction Manual preview
AW121005E
Бренд: Montgomery Ward Страницы: 10
Profroid SUPERCOLD SCH Operating Instructions Manual preview
SUPERCOLD SCH
Бренд: Profroid Страницы: 63
National Comfort Products Comfort Pack U Series Installation Manual preview
Comfort Pack U Series
Бренд: National Comfort Products Страницы: 44
Danby DAC12078EE Owner'S Instructions Manual preview
DAC12078EE
Бренд: Danby Страницы: 19
Kelvinator KSE88CRC Installation Manual preview
KSE88CRC
Бренд: Kelvinator Страницы: 12
Dawlance Classic Plus 15 Owner'S Manual preview
Classic Plus 15
Бренд: Dawlance Страницы: 13
Olimpia splendid PELER 4 Instructions For Use And Maintanence preview
PELER 4
Бренд: Olimpia splendid Страницы: 12
Maytag 22-11-2222N-003 User Manual preview
22-11-2222N-003
Бренд: Maytag Страницы: 26
Kaden KCI36 Installation Manual preview
KCI36
Бренд: Kaden Страницы: 32
ComfortStar CHH012CA-13 Manual preview
CHH012CA-13
Бренд: ComfortStar Страницы: 43
Daikin VRV RXYQ10P7W1B Technical Data Manual preview
VRV RXYQ10P7W1B
Бренд: Daikin Страницы: 139

Бренды по названию

Популярные бренды

Загрузить еще бренды