Trane IntelliPak CG-SVX02B-EN, Руководство по установке и эксплуатации

Страница: 22 / 64

22
Installation
Figure 5
Typical Spring Isolator Selection & Location
Spring Isolator Part Number @ Mounting Location
Unit Location 1 Location 2 Location 3 Location 4 Location 5 Location 6
Size Al Cu AL Cu AL Cu AL Cu AL Cu AL Cu
C20 CP-1-28 CP-1-31 CP-1-27 CP-1-27 CP-1-27 CP-1-27 CP-1-26 CP-1-26
C25 CP-1-31 CP-1-31 CP-1-27 CP-1-28 CP-1-27 CP-1-28 CP-1-26 CP-1-27
C30 CP-1-32 CP-2-27 CP-1-27 CP-1-27 CP-1-31 CP-1-31 CP-1-26 CP-1-26 CP-1-27 CP-1-28 CP-1-25 CP-1-25
C40 CP-1-28 CP-1-28 CP-1-28 CP-1-31 CP-1-28 CP-1-28 CP-1-28 CP-1-28 CP-1-27 CP-1-28 CP-1-27 CP-1-28
C50 CP-1-31 CP-1-32 CP-1-31 CP-1-32 CP-1-31 CP-1-31 CP-1-31 CP-1-31 CP-1-28 CP-1-31 CP-1-28 CP-1-31
C60 CP-1-32 CP-2-27 CP-2-27 CP-2-28 CP-1-32 CP-2-27 CP-1-32 CP-2-27 CP-1-31 CP-1-32 CP-1-31 CP-2-27
Notes:
1. Mounting locations correlate with those shown in point loading illustration.
2. The spring number is marked on the outside of the spring housing, i.e. CP-1-25 is marked 25.
The isolator spring is color coded as follows;
CP-1-25 = Red
CP-1-27 & CP-2-27 = Orange CP-1-31 & CP-2-31 = Gray
CP-1-26 = Purple
CP-1-28 & CP-2-28 = Green CP-1-32 = White
3. Refer to the "Spring Isolator" section, step 4, for proper clearance.